Storage

  • Store in its original packaging, protected from shocks.
  • Store in a clean and dry location, protected from bad weather.

Inspection

  • Check that the product is in a good condition. Check for physical damage, etc. Replace any damaged product.
  • Check that the nozzle distribution holes are not obstructed.
  • Check that the protected room still corresponds with the former approved one. If not, new calculations must be made for nozzle location and drillings.
  • Check that a nozzle is present on every pipe network end.

After an actuation

  • BUJ-G3/8-F-C and BUJ-G3/8-C variants: Put the cap back onto the nozzle.

The product must be inspected as often as required by applicable local regulations. For more information, refer to the maintenance documentation.