Event commanding
Allows User to acknowledge and reset events from the Events list in Building X Fire Connect app as well as to deactivate and then to activate again external alarm devices in case of alarm.
Isolation
Allows User to switch off zone or detector which triggered alarm or pre-alarm from the corresponding event details page. User can switch on the zone and the detector from the corresponding isolation event. It is also possible to switch on/off zones and detectors from the detection tree. User can filter switched off elements of the topology in Devices view.
Navigation from an event to the topology
Provides possibility to navigate from an event to the corresponding element in the topology.
Alarm verification concept countdown and Alarm delay off
Displays countdown for examining the alarm cause and then countdown for remaining time until the alarm is transmitted to the fire brigade as well as messages about remote transmission accordingly to the panel configuration and its mode (manned/unmanned). Allows User to transmit immediately alarm to the fire brigade by pressing Alarm delay off button.