Use the 'Readout' submenu to get the measured values.
Click 'Start' to readout all the devices on the meter list.
As soon as a device is successfully read, the message "OK" is displayed in the "Acquisition status" column. If unsuccessful, the message "ERROR" displays.
The read out device data can be sorted by column content:
User description
M-bus description
Readout value
Type
Tariff
You can save the data, if all devices were correctly read, to the plant by clicking the 'Save readout' button.
Note 
A manual start to plant readout can also be stopped: All the meter data read out to this time is retained.