The submenu 'Device addressing' lists the devices with fabrication number and device name. You can list and edit the primary addresses of the devices. Select the checkbox for the devices you want to edit (primary addresses).
Note
Select the checkbox at the top to select the entire column.
The following buttons are available:
'Read primary address': Displays the primary addresses of the devices.
'Assign automatically': Automatically assigns a primary address to the devices. The primary addresses are assigned in ascending order.
'Write and save primary address': Writes the assigned primary addresses to the associated devices.
'Stop': Stops the writing of the primary addresses.
'CSV': Exports the fabrication numbers, device names, and primary addresses of the devices to a CSV file.
Click a column header to sort the column.
Note
You can edit individual primary addresses by selecting the checkbox for the device to edit. Click the primary address of the device and overwrite it. Then click 'Write and save primary address' to write the primary address to the device.
Note
A connection is required to read or write the primary address.
If a device is not connected or cannot be reached, the device cannot be assigned a primary address. In this case, the message "ERROR" displays.