Normal display

1

Tap to display detailed information and additional settings.

2

Displays whether the system is in an energy-optimized mode. If the leaf is red, predefined settings were changed. Tap the red leaf to restore the energy-saving mode. The leaf again turns green.

3

Room temperature.

4

Tap to toggle between “At home” and “AWAY”.

5

Displays whether the thermostat is following a scheduler () or following your setpoint changes permanently (). Following a scheduler can mean the following:

  • If there is network connection and you’ve also set your scheduler, the thermostat follows your scheduler. Your temporary change of the temperature setpoint only takes effect during the currently scheduled mode.
  • If network is connected but no scheduler set, the thermostat applies the system’s default scheduler. For more information on the default scheduler, see Setting schedules.
  • Without network connection or valid time, the thermostat cannot retrieve scheduler information from the Cloud. It always works under the “Comfort” mode.

6

Tap or slide to change the room temperature setpoint.

Idle display

1

Relative room humidity

2

Shows room air quality:

  • If the icon is green, the air quality is good.
  • If the icon is orange, the air quality is moderate.
  • If the icon is red, the air quality is poor.

To ensure room air quality is measured accurately when the room is closed for a long time, forced air circulation such as opening a window is recommended.

3

Indicates the system is in an energy-optimized mode. If the leaf is red, predefined settings were changed. Tap the red leaf to restore energy-saving mode. The leaf turns to green.

4

Room temperature.

NOTE: The icons displayed in idle mode may differ under different scenarios.