Connecting to a WLAN network allows you to connect to the cloud server and control your thermostat from a smartphone. Depending on how you’ve set the thermostat to connect to the Internet, you must go to “Advanced Settings” or “Settings” to manage the WLAN connection:

  • If you’ve selected “Private WLAN” (home use), go to “Settings”.
  • if you’ve selected “Administrated WLAN *” (commercial use), go to “Advanced Settings”.

Connect to a network

  1. If the thermostat is selected for commercial use, do the following:
  • On the Home screen, tap , then tap . The “Advanced Settings” page displays.
  • If required, enter your administrator password.
  • Tap > , and then wait for the thermostat to discover the networks nearby.
  1. If the thermostat is selected for home use, do the following:
  • On the Home screen, tap , and then tap until the “Settings” page displays.
  • Tap > , and then wait for the thermostat to discover the networks nearby.
  1. Tap your desired network. If necessary, tap or to scroll through the networks to select one.
  1. For secured networks, enter the relevant password, and then tap “Connect”.

Note: For more information about the administrator password, see Creating an administrator password.

Manually add a network

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > , and then tap to scroll down to find and tap “Add Network”.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > , and then tap to scroll down to find and tap “Add Network”.
  1. Enter the Network name (SSID) information.
  1. To select a security type, tap the “Security” field.
  1. Tap “Connect”.
  1. If prompted, enter the relevant password, and then tap “Connect”.

Configure your current network settings

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > . Your current network displays on the screen.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > . Your current network displays on the screen.
  1. Tap “Network Settings”. The default DHCP (Dynamic host configuration protocol) setting page displays on the screen.
  • If necessary, tap or to scroll through and view other network DHCP settings like “Preferred DNS”.
  • If you want to customize the current network settings, tap “Manual”, select a field, or tap or to scroll to the desired field, and then enter a new setting.

Connect to a network via push button

If you have little knowledge about wireless security, using the push button method makes it easy for you to establish a secure wireless network connection. If you want to use this method, you must have a WPS (Wi-Fi Protected Setup) compatible router.

Connect to a network using the push button

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > , then tap until you see “Push Button Setup”.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > , then tap until you see “Push Button Setup”.
  1. Tap “Push Button Setup”, and then press the WPS button on your WPS-supported router to start the discovery of your thermostat.
  1. On the thermostat, tap > “Connect”.
  1. Tap “OK” once the thermostat is connected to the network successfully.