This view displays detailed information of all hardware interfaces connected to the selected station. The displayed values in the list are always 'live'.
Follow the below steps to display the dynamic station data:
- Double-click on the station name to switch from the 'SymbolOnlyMode' to the 'DetailedMode'.
- Press the 'Details' button
Or
- Select a station on the 'System Overview' tab.
- Click on 'Station' > 'Functions' >
'Show Dynamic Station Data of selected…F8'.
Or
- Right-click on the 'System Overview' tab to open the context menu.
- Click on 'Functions' > 'Show Dynamic Station Data'.
Note: To display system internal information, perform a ALT + left-double-click on a station.
Designation | Function/meaning (for all amplifier and speaker lines of that matrix) |
|---|---|
'I/O’ | Number of logic control input or output. |
'DigIn’ | Display the actual state of all logic control inputs, 0= inactive, 1= active |
'DigOut’ | Display the actual state of all logic control outputs, 0= inactive, 1= active |
‘Analog In’ | Display the actual state of the analog control input voltage 0..10V. The voltage is displayed in [%] and a corresponding gain value [dB] (when the voltage is used to control a volume). |
'Input Prefade' | Level of the analog audio input signal |
‘Input Postfade’ | Level of the analog audio input signal after the signal processing |
‘FeedNetwork’ | Level of the network program channel sent into the network |
‘Audio Output’ | Level of the local analog audio output signal |
’AVC’ | Displays the AVC gain value for all analog audio outputs. Precondition:
|
‘Speaker Line x’ | Display the line detection state of all used speaker lines, when ‘Line Detection’ is enabled in the “Amplifiers and Speakerlines” > “DSPSupervision” tab |
‘Backup Information’ | Display information of the backup amplifier supervision and if any of the audio channels have switched into backup mode, when ‘Backup Control’ is enabled in the“Amplifiers and Speakerlines” > “DSPSupervision” tab |