Via this tab the user can verify if settings of a system have been changed.

To use this tab, you need to select a single system, load and compare an actual snapshot via the 'System' > 'Compare with Snapshot' menu.

Compare with Snapshot
Loading a snapshot

 

You may have to define a filter under 'System Name' beforehand. Newer elements are marked as bold. Dynamic hints show configuration changes. You can compare two snapshots by loading a snapshot with <Ctrl> + <O>.

If the 'Check StationInfo' checkbox is unchecked, the two systems are compared depending only on the regular configuration pages. The latest change is shown.

If the 'Check StationInfo' checkbox is checked, the 'Basic Station Configuration' page is also compared. Therefore, you may see different DSP software versions, as shown below.

Display of different DSP software versions