The 'Peripherals' tab shows:

  • Summary and statistics of all activated external  UARTs
  • All used logic control inputs
  • All used logic control outputs

'Used UARTs'

If the external UART interface is enabled, the station will be displayed in this section, together with the activated protocol and RX/TX statistics.

'Used Logic Inputs (Connector)'

Displays detailed information about the station, function, state, and numbering of a logic control input being used. Events triggered by each function are displayed in real time.


  • If a keypad key is triggered, the state of the affected key and the associated LED will be displayed.
  • Or, if a network audio channel is affected, the state and level of this feed is updated periodically.

Use this information to determine the status of all used logic control inputs.