Overview
The radio manual call points FDM275 and FDM275(F) are intended for use in areas of a house where a fire can be detected by people who can manually trigger an alarm.
The radio manual call points FDM275 and FDM275(F) consist of a housing, a switching unit, and a battery pack.
Goal and purpose
This document contains all the information required to install the radio manual call points FDM275 and FDM275(F).
Prerequisites:
- The installation location of the radio manual call point has been established.
- Mounting should be performed by a specialist in compliance with safety regulations.
You will find more information about the radio manual call points FDM275 and FDM275(F) in document A6V10401120.
Applicable documents
Document ID |
Title |
---|---|
A6V10271323 |
Data sheet SWING Neural radio fire detector FDCW241, FDOOT271, FDM273, FDM275, FDM275(F) |
A6V10401120 |
Technical Manual Radio manual call point FDM275, FDM275(F) |
A6V10227631 |
Planning Radio fire detection system SWING |
Intended use
The radio manual call points FDM275 and FDM275(F) may only be used together with a radio gateway FDCW241 in a fire detection system FS20/FS720.
FDM275 will now apply to both variants of the radio manual call point – FDM275 and FDM275(F).