If a protective cover (accessories) is used, proceed as follows:
- A compatible protective cover is available. See the chapter 'Accessories'.
- Open the door of the manual call point.
- Remove the glass insert. See the chapter 'Replacing the glass insert'.
- Guide the protective cover (1) through the opening in the door from the front, as shown in the diagram.
- Insert the pivot pins (2) for the protective cover (1) in the two recesses on the rear side of the door, as shown in the diagram.
- Install the glass insert. See the chapter 'Replacing the glass insert'.
- Close the door of the manual call point.
- The protective cover is inserted.
1 |
Protective cover DMZ1197-AC |
2 |
Pivot pin |